(NOT SUPPORTED SEE DESCRIPTION) 0xferd's Engine and Transmission edit pack

In this update (v7.5) I did some new changes to my mod!

1: Oshkosh Defense Hemtt got some reworks done to it.

- 5000gal fuel tank for Oshkosh Defense Hemtt (chassis replacement, put my mod ontop of the Oshkosh Defense Hemtt mod)

- Level requirement rework for Kriechbaum C15

- More power options for Kriechbaum 12v71 and DD92

- Better transmissions (Real Eaton Transmissions is required)

2: The Autocar AT/DC gets some engines by Kriechbaum and Zeemods

- 444 series by Kriechbaum

- 12v71 by Kriechbaum

- DD92 by Kriechbaum

- DD60 by Kriechbaum

I have also added some of Zee's engines to the Autocar AT/DC however they are not required at all but are optional if you want to use them.

You will of course need to have his engines installed if you want to use them you can easily get them from off his website as they are not that expensive at all.

I only included Zee's specs to the Autocar AT/DC, I did not include his sounds whatsoever, so you will need his mods if you want these engines to work!

- Zee Big Cam

- Zee DD92

- Zee 3408 

Anyways enjoy!

New update v7.4 has arrived!

I have given out support for Pinga's W900/T800 truck mod.

His truck mod has been given several engines, about 49 engine specs, about 10 individual engine types.

You can find it here > W900 Pinga – Pinga Mods the truck is 100% free (for modders out there truck ID > kenworth.wp)

Caterpillar:

3408 - 450hp to 700hp

C15 - 500hp to 800hp

Cummins:

444 series - 444hp to 600hp

M11 - 370hp to 600hp

N14 - 435hp to 600hp

X15 - 400hp to 605hp

Detroit:

8v92 - 450hp to 800hp

12v71 - 525hp to 730hp

DD60 - 455hp to 600hp

Anyways enjoy!

Had to fix an issue where 2 MX13 455hp options were showing, this issue was fixed, please redownload the mod, version will be the same, was just a quick and simple fix.

New update v7.3 has arrived!

I know that I usually wouldn't do such a thing, but thing time I have done it, I have actually supported the new Volvo VNL!

The truck now comes with several transmission options, 13/18 spd, with and without retarder plus diff ratios from 3.90 to 4.00

If you have Fury6's 913/18 spd transmission mod, I found out his mod does support that truck.

Also this truck comes with some engine options, DD13-15-16 and Paccar MX-13, enjoy!

New update v7.2 has arrived!

I updated all .sui files to match Kriechbaum's new existing .sui files.

This only effects trucks that either has engines that Kriechbaum hasn't supported, or trucks where Kriechbaum isn't even supporting at all (bascially a crossover patch or CAST)

I am going to stop calling it "crossover patch" and just call it "CAST" both of the names means the same thing.

As far as I know of, all engine "should?" be compatible with convoy/mp.

However if for some reason you don't hear any sound, please use a different engine.

(this shouldn't be the case if you have the mod installed correctly)

Anyways enjoy the new update!

Let me know if you do encounter any issues you may come across, Thanks!

I don't know how this happened but I somehow either forgot to upload v7.0 of my mod either it was left out or I accentially skipped it or I never uploaded it, but here it is.

I also change the file name so that it would display a v7.1 beside the name so that you and your friend won't have issues with using it in Convoy.

I also did some cleanup of the mod description as well, I thought that the massive change log was a bit redundant.

New update v7.1 has arrived!

I have given out support for 2 vehicles from the drive-able AI vehicles mod that is on the steam workshop.

"mack.ai" and "schoolbus.ai"

Both vehicles come with 13 and 18 spd transmissions with both 3.90 to 6.00 rears

mack.ai only gets DD8v92ta

schoolbus.ai gets Cummins 444 series, N14, X15, Caterpillar 3408, 3406, C15, Detroit Diesel 13-15 series

also "autocar.acx" and "pierce.arrowxt" got more transmission ratios of 5.00 - 6.00 for both 13/18 spd transmissions with retarder and without retarder.

- New update v6.9 I made some new changes to the following engine files.

n14_650v2.sii

zmc3406_600.sii

zmc3406_800.sii

zmn14_1000.sii

Here are following changes made to them.

- Adjusted Torque output (used a online calculator that calculates hp and rpm and outputs maximum torque)

- Added a new code line into the files named "resistance_torque:"

- And reduced the jake brake strength by a little bit than originally set to.

- deleted some leftover code including "consumption_coef:" and "consumption_coef:" due to that I don't want these engines to eat DEF(Diesel Exhaust Fluid) aka AdBlue.

- left in "consumption_coef:" but I set it to "0" to ensure that it doesn't eat DEF if the truck has DEF in it.

Here is a list of trucks that got the upgraded engine files.

Oshkosh: hemtt

superliner.ksw

freightliner: cascadia.2019, coronado, flc

intnational: 9900i, 9900x9300, hx520h, lonestar, LT

kenworth: k100, k100e_of, k100e__of, t600, t680, t680ng, t800, t800.2016, t800_gtm, w900, w900a, w900b_gtm, w990, kw.w900jl

peterbilt: 389, 389v2, 386, outlaw.359, pet379, dom379, peter281, pete.jc, 567_gtm, pinga, rezbilt.389

westernstar: 49x, 4900

That's about it, enjoy the new update.

- New update v6.8 has just released to the public!

Just gave out support for SFA version of Overfloaters K100E (kenworth.k100e__of)

Here are the following engines (Kriechbaum)

- Cummins 444 series, M11 and N14, ISX15 normal and straight piped and ISXS.

- Caterpillar 3408, 3406, C15.

- Detroit Diesel 13/15/16 series, 60 series, 8v92 series, and 12v71 series.

Here is the list of transmission types for that truck

Both 13/18 spd, requires Fury6's 913/18 transmission mod off of steam workshop.

Comes with 3.90 and 4.00 rears with retarder and without retarder options.

Pretty much it, enjoy the new update!

- New update patch, v6.7 just came out, gave out support for just 2 more trucks.

Kenworth 909 and Marmon P57

Since these trucks already have some engines, I decided not to support any engines but just transmission ratios for both 13/18 spd transmissions with 3.90 and 4.00 rears, with retarder variant and no retarder variant.

Enjoy the new update!

(build was taken down again and put back up, reason was because I made a mistake, and fixed it on my part, mod is back up.)

New update patch, v6.6 just came out, gave out support for 3 more modded trucks.

Kenworth 521 comes with 3408, DD-12v71t, DD-8v91ta.

Ford LTL 9000 comes with DD-12v71t, C15 2 types, DD60s.

WesternStar 4800 comes with DD13, 444 series, X15.

All sounds are by Kriechbaum, does not include his sound banks just .sui files and .sii files.

Has plenty of transmission ratios, both 13/18 spd, 3.90 and 4.00 rears, with retarder and no retarder.

Yeah, pretty much it, enjoy!

- New update patch v6.5 with the update of Kriechbaum's engine megapack v4.2 having updated .sui files for Cummins N14, and DD13-15-16 .sui files, I decided to update my mod plus clear out some more conflicts so that both of our mods don't cause any issues when being used together.

Enjoy the new update.

Just uploaded to Trucky for the first time.